GNLN-O5 conductive paste

The GNLN-O5 is based on the nickel series coarse carbon nanotubes as the core, NMP as the solvent, adding a certain amount of graphene composite conductive paste. The addition of the appropriate proportion of graphene increases the flexibility of the pole, the high thermal conductivity of graphene, improves the heat transfer in the lithium-ion battery, and improves the safety performance. At the same time, the use of carbon nanotubes and graphene excellent electrical conductivity, can be in the whole material system to form efficient line surface contact, constitute a three-dimensional conductive network, can effectively reduce the battery internal resistance, improve the battery charge and discharge rate and cycle performance. Product Features 1. Production of graphene by mechanical stripping method, high conductivity; 2. Reduce the amount of conductive agent and binder used, improve the battery density; 3. The slurry has stable viscosity, good leveling, easy dispersion and easy coating; 4. Improve the battery charge and discharge rate and cycle performance; 5. Improve safety performance. product morphology Technical parameters Use recommendations Recommended for use in the LFP system. Packing method Available in 25kg, 200kg or 1000kg packages.

Product Classification:

Oil-based conductive paste

Key words:

E-mail:

Hotline:

Details

Product Introduction

Product Features

1. Production of graphene by mechanical stripping method, high conductivity;

2. Reduce the amount of conductive agent and binder used, improve the battery density;

3. The slurry has stable viscosity, good leveling, easy dispersion and easy coating;

4. Improve the battery charge and discharge rate and cycle performance;

5. Improve safety performance.

product morphology

v 产品介绍 GNLN-O5是以镍系粗碳纳米管为核心，NMP为溶剂，添加一定量的石墨烯复合导电浆料。适当比例石墨烯的加入增加极片柔韧性，石墨烯高热导率，改善锂离子电池中的热传输，提升安全性能。同时，利用碳纳米管和石墨烯优异的导电性能，可在整个材料体系中形成高效的线面接触，构成三维立体导电网络，能够有效的降低电池内阻，提高电池充放电倍率及循环性能。 v 产品特点 1. 采用机械剥离法生产石墨烯，高导电性; 2. 降低导电剂和粘结剂的使用量，提升电池密度; 3. 合浆浆料粘度稳定，流平性良好，易于分散，易于涂布; 4. 提升电池充放电倍率及循环性能; 5. 提升安全性能。 v 产品形貌 v 技术参数 v 使用建议建议使用在LFP体系中。 v 包装方式可提供25千克、200千克或1000千克包装。 v 产品介绍 GNLN-O5是以镍系粗碳纳米管为核心，NMP为溶剂，添加一定量的石墨烯复合导电浆料。适当比例石墨烯的加入增加极片柔韧性，石墨烯高热导率，改善锂离子电池中的热传输，提升安全性能。同时，利用碳纳米管和石墨烯优异的导电性能，可在整个材料体系中形成高效的线面接触，构成三维立体导电网络，能够有效的降低电池内阻，提高电池充放电倍率及循环性能。 v 产品特点 1. 采用机械剥离法生产石墨烯，高导电性; 2. 降低导电剂和粘结剂的使用量，提升电池密度; 3. 合浆浆料粘度稳定，流平性良好，易于分散，易于涂布; 4. 提升电池充放电倍率及循环性能; 5. 提升安全性能。 v 产品形貌 v 技术参数 v 使用建议建议使用在LFP体系中。 v 包装方式可提供25千克、200千克或1000千克包装。

Technical parameters

黑龙江省石墨谷产业集团

Use recommendations

Recommended for use in the LFP system.

Packing method

Available in 25kg, 200kg or 1000kg packages.

Key words:

the

and

battery

Related Products

SAL-O4 conductive paste

The SAL-O4 is based on the array of carbon nanotubes as the main material, NMP as the solvent. The product uses a new array of carbon nanotubes, diameter 4-11nm, average 7nm, purification process using high temperature purification. The slurry itself has the characteristics of very low metal impurity content, good fluidity and easy dispersion. Compared with the pure array carbon nanotube slurry, this product can significantly improve the rate performance and cycle performance of lithium ion batteries. Product Features 1. Using a new array of carbon nanotubes, smaller diameter, better conductivity; 2. Very low metal impurity content; 3. High fluidity, viscosity less than 2000mpa · s (measured by rheometer 101/s); 4. Compared with ordinary array carbon nanotubes, the cycle performance and rate performance of the product can be significantly improved. product morphology Technical parameters Use recommendations It is recommended to use in NCM and LCO systems. Packing method Available in 25kg, 200kg or 1000kg packages.

NFLR-O5 conductive paste

The NFLR-O5 is based on iron-based wound carbon nanotubes as the core and NMP as the solvent. The product uses winding carbon nanotubes, diameter 10-25nm, average 20nm, purification process using acid washing purification, part of the carbon tube is not purified. The slurry has the characteristics of high cost performance, good fluidity and easy dispersion. Product Features 1. Good conductivity, high cost performance; 2. Good liquidity and easy dispersion. product morphology Technical parameters Use recommendations It is recommended to use in NCM and LCO systems. Packing method Available in 25kg, 200kg or 1000kg packages.

GSLF-O10 conductive paste

GSLF-O10 is a conductive carbon black, carbon nanotubes and graphene composite conductive paste, NMP as solvent. Multi-conductive agent compound, build point-point, electric-line, point-surface multi-level conductive channel, with the minimum content of conductive components to play the best conductive effect, reduce the amount of conductive agent, improve energy density. At the same time, this product is a high solid content product with high cost performance advantages, which can solve performance problems for customers while reducing cost pressure. Product Features 1. Multi-conductive agent composite, long-range conductivity and short-range conductivity, better conductivity; 2. High solid content, low cost, high cost performance; 3. Improve the battery charge and discharge rate and cycle performance, improve energy density; 4. Improve safety performance. product morphology Technical parameters Use recommendations Recommended for use in the LFP system. Packing method Available in 25kg, 200kg or 1000kg packages.

GNLN-O5 conductive paste